BIOLAB-DAVIDSON Sound and Vibration Solutions from PCB & LMS!

Industry Update

	One easy to remember phone number: 1-300-SENSOR (736-767)
	click to visit www.davidson.com.au today!
	Try out the Davidson Online Conversion Tool used by Universities & Engineers around the world
	Incorporating

When You Need Sound & Vibration Solutions- You Can't Go Past PCB & LMS!

As leaders in measurement and testing technology, and as part of our dedication to keeping you well informed and help you find the right solution, we are pleased to highlight a range of sound and vibration solutions from PCB Piezotronics and LMS International- both leaders in their range of acoustic measurement, vibration and data acquisition technology. In this highlight, we will look at:

PCB Piezotronics' vast range of Microphones and Accelerometers
LMS' impressive mobile data acquisition front-end: the "SCADAS Mobile"

PCB Acoustic Measurement- Microphones

The Vibration Division of PCB® Piezotronics, Inc., offers a variety of acoustic measurement products, including condenser, modern prepolarized, traditional externally polarized, array, probe, low-profile surface, and special purpose microphones. Microphone products are complemented by an assortment of preamplifiers, signal conditioners, A-weighting filters, handheld calibrators, and accessories.
Please click here for more information on PCB's range of acoustic microphones	Sound Power Testing Engine Noise Analysis Environmental Noise Analysis Near-field Acoustic Holography Building Noise Studies Acoustic Chamber Testing Sound Pressure Mapping

Series 130 ICP™ Array Microphones provide a cost effective method for large channel count sound pressure measurements. Modern Prepolarized and Traditional, Externally-Polarized Precision Condenser Microphones (Series 377) incorporates microphones of the highest quality, accurate enough to be used for laboratory testing, and rugged enough for field use in Type 1 system measurements.

PCB Vibration Sensors- Accelerometers

PCB® offers a vast selection of accelerometers to accommodate anything from routine measurement tasks to extraordinary testing requirements. Whether it’s a cell phone quality assurance test or continuous monitoring of an aircraft engine, we can help, with sensors which are off-the-shelf or custom designed for a specific application.

Please click here for more information on PCB's range of accelerometers

General Purpose ICP® Accelerometers: Lightweight titanium or aluminium construction, Shear mode sensing geometry, Resistant to base strain and thermal transient effects, Laser-welded, Hermetically sealed (most models), Adhesive and stud mount styles.

Triaxial ICP® Accelerometers: Measure in three orthogonal directions, Lightweight titanium construction, Shear mode sensing geometry, Single-point hook up for cable or connector

Structural Testing & Modal Analysis Products: ICP® accelerometers with excellent phase characteristics and lightweight construction to minimize mass loading effects, Intelligent mounting, signal conditioning, and cable routing schemes, TEDS options – sensors with on-board memory, which report their identity and sensitivity, Ideal for large channel count and MIMO tests

High Temperature, Charge Output Accelerometers: Engines, Environmental chambers, Gas turbines, Radioactive environments

Shock ICP® Accelerometers: Individually qualified with high-amplitude Hopkinson Bar test, Versions with internal filters for resonance suppression

Low Temperature ICP® Accelerometers: Cryogenic pump testing, Liquefied gas delivery systems, Vacuum pump testing

Low Frequency ICP® Accelerometers: Bridges & civil structures, Building vibration, Floor & foundation monitoring, Optical instrument studies, Semiconductor manufacturing, Site surveys for sensitive equipment

DC Response Accelerometers: Unlike charge output piezoelectric and ICP® accelerometers, DC response accelerometers possess the capability to measure static or constant acceleration without a low frequency cut off restriction, since their frequency response extends to 0 Hz. PCB® offers several sensing technologies for DC response accelerometers, including piezoresistive and capacitive. Applications include aerospace satellite & launch vehicle vibration, automotive crash sled testing, automotive road & load measurements, aviation ground vibration & flight testing, centrifuges and gravitational force.

APPLICATIONS:

Automotive & Transportation: Balancing, Body-in-white, Crash Testing, Drive Train Performance, Dynamometer Testing, NVH Studies, Ride Simulation, Road Response, Squeak & Rattle Detection

Product Testing: Appliance Design, Drop Testing, Modal Analysis, Package Testing, Quality Assurance, Shaker Control, Sporting Equipment, Structural Testing, Vibration Control, Vibration Stress Screening
Research & Education: Animal Studies, Environmental Simulation, Impact & Penetration Studies, Seismic Monitoring
Aerospace & Aviation: Flight Flutter, Flight Testing, Ground Vibration Testing (GVT), HUMS, Jet Engine Testing, Landing Gear Response, Launch Vehicle Monitoring, Simulated Pyroshock

LMS SCADAS Mobile Data Acquisition Front-ends...

Power & Flexibility for Lab & Field Testing

The LMS SCADAS Mobile front-ends pack the quality and acquisition power of the renowned LMS SCADAS system into a compact and rugged design, offering versatile data-acquisition and signal-conditioning capabilities. Designed for high measurement and testing productivity, LMS SCADAS Mobile represents one of the most powerful systems in its class.

	LMS SCADAS Mobile supports both LMS Test.Lab for test-based noise and vibration engineering and the LMS Test.Xpress sound & vibration analyser and data recording solution. LMS Test.Xpress is seamlessly integrated with the state-of-the-art LMS SCADAS Mobile data acquisition front-ends. You can choose the compact and ultra-portable 4 to 8 channel SCM01 system or go for the laptop-size SCM05 unit, a modular front-end with five slots that host up to 40 input channels. Both systems provide impressive performance, solid quality and advanced measurement technology into a robust and compact package. Features & Benefits Scalable system configurations Maximum measurement power A portable and solid package Professional support for full productivity 4 to 40 channels Up to 102,4 kHz sampling rate per channel 24 bit DSP technology 105 dB signal to noise ratio 2.2 Msamples/s throughput rate High-speed Ethernet connection Runs more than 4 hours on internal battery Qualified for rough and high temperature operating conditions *Ford Australia has implemented LMS systems as part of their corporate strategy... click here to read more.
LMS Scadas Mobile provides impressive performance, solid quality and advanced measurement technology in a robust and compact package.

For more detailed information on the LMS SCADAS Mobile, please click here for the pdf datasheet.

Davidson Calibration Services:

When you have sensors and instrumentation requiring calibration- we have the solution for you!

As leaders in measurement and calibration, and a part of our commitment to Australian Industry, Davidson eCalibration is able to offer NATA Calibration or Traceable calibration either as an On-Site Service or In-house in either of our Calibration Labs. Through our local Calibration facilities and mobile units we are able to offer calibration for the various test equipment. Calling on the qualifications of our calibration staff and utilizing our suite of test equipment and dedicated calibrators and standards, we are able to offer calibration on a range of equipment including Electrical, Pressure, Temperature, flow, force and more… This will ensure that your equipment is back on-line with minimum fuss.

Whether you already have the equipment we represent, or are using other brands-
We can calibrate all of them for you!

For more information on calibration of your assets, please fill in the request form below and check the "Davidson Calibration Services" box.

For More Information:

For more information on the above PCB and LMS Sound and Vibration Solutions, or any of Davidson's equipment, you can complete the information request form below, and either fax it to us at 1-300-736-755, or email us at info@davidson.com.au for an immediate response.

You can also visit our website at www.davidson.com.au and view our extensive range of measurement solutions.

We look forward to assisting you with your measurement needs.

Best Regards

Mandy Jansz
Marketing Coordinator
Industrial Technologies- Incorporating Davidson Measurement

Online Information Request Form (double click message & complete fields below)

Please have a sales engineer call me	Please send datasheets electronically
PCB Microphones & Accelerometers	LMS SCADAS Mobile Data Acquisition Front-ends
Davidson Products
Vibration & Motion Products	Level, Position & Process Sensors
Ultrasonic Leak Detection	Force Sensors
Pressure Calibrators & Indicators	Flow/Velocity
Shaker Test Systems	Electrical Calibrators & Simulators
Modal Analysis & FFT Equipment	Condition Monitoring Equipment
Aviation Ground Test Equipment	Acoustic Analysis Equipment
Colour and Light Measurement	Strain Gauges & Stress Analysis
Environmental Simulation Equipment	Viscometers
Thermal/Humidity/Corrosion Chambers	Refractometers & Polarimeters
Humidity, Moisture & Gas Sensors/Analysis	Davidson Calibration Services

Please enter your contact details
First Name Last Name	Email
Position	Phone
Company	Mobile
Department	Fax
Address

If you do not have access to the Internet to complete this online form, print out the form and fax it to Mandy Jansz on 1-300-736-755

To unsubscribe from this update service simply click & send this hyperlink: mailto:info@davidson.com.au?Subject=unsubscribe