Industrial Technologies

division of BIOLAB 

Microflown Sound Pressure & Particle Velocity Sensors

Scanning Probe

 

PDF Datasheet (0deg)|PDF Datasheet (45deg)

PDF Datasheet (90deg)| Request Info 

The Scanning Probe comes in three orientations:

  • 0 degrees

  • 45 degrees

  • 90 degrees

The Scanning Probe comes with:

  • Signal conditioner with an option for correcting the frequency and phase response

  • Powering module

  • Sensor cable

  • Option for 12V powering

  • A protective metal case is provided to ensure that the probe is not damaged when it's not in use.

Use
 

Close to an object (in the so-called very near field) the particle velocity and the structural vibration coincide. So therefore Microflown sensors can be used for the non contact measurement of the normal component of the structural velocity. The scanning probe is designed in such way that is possible to measure close to a surface.

The sensor wires of the Microflown are protected by a little cap. This way of packaging does not increase the particle velocity at the element so there is no package gain. The selfnoise therefore is 10dB higher as the ½” probe and the upper usable sound level is also 10dB higher.

Industrial Technologies Industrial Technologies Industrial Technologies Industrial Technologies Industrial Technologies

Copyright 2001 Microflown Technologies B.V.