PDF Datasheet | Request Info 

• The 208 Series quartz force sensors are general purpose medium range sensors for dynamic measurements such as compression, impact, reaction, and actuation forces in testing, vibrating, tensioning, balancing, striking, welding, rolling, cutting, coining, pressing, machining, punching, and similar operations. They measure dynamic and short-term static forces from 0.0002 to 5000 pounds at any level within this range.

• These sensors have a side-exit connector with 10-32 tapped mounting holes on the top and bottom surfaces. They easily install to the test structure with 10-32 mounting studs. The high stiffness of these sensors allows them to become an integral part of the structure under test. A removable curved impact cap for use in drop testing applications is supplied with each sensor.

Model: 208C01

Sensitivity

500 mV/lb (110 mV/N)

Dynamic Range:

Compression: 10 lb (45N)
Tension: 10 lb (45 N)

Maximum Force:

Compression: 100 lb (450N)
Tension: 100 lb (450 N)

Stiffness

6 lb/µin. (1 kN/µm)

Low Frequency (-5%)

0.01 Hz

Upper Frequency Limit

> 36k Hz

Discharge Time Constant

> 50 sec

Operating Temperature Range

-65 to +250 °F (-54 to +121 °C)

Sensing Element

quartz

Dimensions

0.625 in. x 0.625 in. with 0.59 in. side connector (15,9 mm x 15,9 mm with 15,0 mm side connector)