PDF Datasheet | Request Info 

The New ICP® Series 260A utilizes built-in microelectronics to convert the high impedance charge output from the quartz sensing element to a low impedance voltage for operation in laboratory or harsh environments.
This exclusive design can simultaneously measure dynamic or quasi-static force in three orthogonal directions using a single multiconductor cable between the sensor's hermetic four pin connector and a standard PCB signal conditioner. Several sizes are available to facilitate a wide range of measurement applications.
 

• Low Impedance Voltage Output

• Single Four Pin Hermetic Connector

• Structured with Stable Quartz Element

• Simultaneously Measures Dynamic or Quasistatic

• Force in Three Orthogonal Directions

Model: 260A03 Three Component

Sensitivity

Sz 2.5 mV/lb (0,56 mV/N)
Sx, Sy 10 mV/lb (2,25 mV/N)

Sz 0.25 mV/lb (0,06 mV/N)

Sx, Sy 1.25 mV/lb (0,28 mV/N)
 

Dynamic Range
(for 5V output)

Fz 1,000 lb (4,45 kN)
Fx, Fy 500 lb (2,22 kN)

Fz 10,000 lb (44,48 kN)

Fx, Fy 4,000 lb (17,70 kN)

Maximum Force

Fz 1,320 lb (5,87 kN)

Fx, Fy 660 lb (2,94 kN)

Fz 11,000 lb (48,93 kN)

Fx, Fy 4,400 lb (19,57 kN)

Stiffness

Kz 10 lb/µin (1 750 N/µm)
Kx, Ky 4 lb/µin (700 N/µm)

Kz 40 lb/µin [7 005 N/µm]

Kx, Ky 15 lb/µin [2 495 N/µm]

Operating Temperature Range

-65 to +250 °F (-54 to +121 °C)

-65 to +250 °F (-54 to +121 °C)

Dimensions

0.950 x 1.075 in (24,1 x 27,3 mm)

2.25 x 2.25 in (57,1 x 57,1 mm)