Half Height Sieves
Where smaller quantities of sample are being analysed half height sieves are often used. These are available in diameters of 38, 100, 150, 200, 250, 300, 315, 350, 400 and 450mm, as well as 3, 8, 12 or 18 inches with the complete range of woven wire mesh or perforated plate sieving mediums.

Microplate Sieves
For very fine particle size analysis Endecotts produce a range of microplate sieves made from electro-etched nickel plate in stainless steel frames of 100mm diameter. Available with unique self clearing apertures in sizes from 75 to 5 microns.

Wet Washing Sieves
For samples that need to be separated with the help of wet washing. Available in 8 inches diameter by 4 or 8 inches deep, or their metric equivalents, with brass or stainless steel frames. A complete range of aperture sizes with optional support medium for fine mesh.

Extra Depth Sieves
Extensively used by the construction and cement industries. These extra depth sieves are available with a diameter size of 450mm and a depth of 300mm. Made from plated steel with woven wire mesh or perforated sieving mediums.

Air Jet Sieves
These sieves are specifically designed for use with air jet systems. They are available in 200mm diameter brass or stainless steel frames and an extensive range of aperture sizes.

Grain Sieves
As used by Government Intervention Boards and similar organisations worldwide for testing grains and cereals. Available in 200mm diameter brass frames with plated mild steel slotted plate and a range of aperture sizes as specified in ISO 5223.

Lids & Receivers
Lids, receiving pans and intermediate receiving pans are available in brass, stainless steel or plated steel with the following diameters: 38, 100, 150, 200, 250, 300, 315, 400 and 450mm as well as 3, 8, 12 or 18 inches. Half height receivers are also available.

Pocket Sieve Set
High quality pocket sieves are very useful for testing small samples either in the laboratory or on site. The brass sieve has a range of interchangeable mesh discs of different aperture sizes. It is supplied complete with a sieve brush and belt pouch.

Sieve Brush & Analysis Graph Paper
Double ended sieve brushes specially designed for cleaning sieves with one end coarse bristles and the other fine. Graph paper for the rapid analysis of sieve test data. Pad contains 25 sheets printed on semi-transparent detail paper to allow direct comparison of graphs.
 

Sample Dividers
These hand held sample dividers will subdivide material samples into smaller portions while retaining the characteristics of the original sample. Produced in stainless steel with slot widths or either 6.35mm (1/4in) or 12.7mm (1/2in).

Wet Sieving Kit
For tests that require wet sieving Endecotts offer a conversion kit suitable for the Octagon and EFL shakers. The kit includes top clamping plate with a Perspex cover and spray rose, watertight seals and a stainless steel receiver with drainage spout.