www.davidson.com.au - UE Systems Ultrasonic Detection Applications

Use the scanning module to conduct the broad scanning to pinpoint the air leaks. The scanning module with rubber focusing probe is used to determine the air losses. The tip of the rubber focusing probe on the Ultraprobe 2000 should be held 12 - 15" from the point of leakage. The sensitivity dial is used to increase or decrease sensitivity until the meter is at 50% of scale.

FLOW RATE CHART = CFM

Notice: The values presented in this table are not stated as factual CFM measurement. This table is provided solely for convenience and should only be used as a general guideline.

Factors such as turbulence, leak orifice configuration, pressure, moisture and instrument sensitivity can significantly effect your results.

View Information on the UP2000

Sensitivity Dial	100 PSIG	75 PSIG	50 PSIG	25 PSIG
8.5	.50	.30	.15	.10
8.0	1.0	0.5	.30	.20
7.5	1.1	0.8	0.7	0.7
7.0	1.6	1.0	1.0	0.9
6.5	2.0	1.3	1.3	1.4
6.0	2.3	1.7	1.7	1.8
5.5	3.3	2.2	2.2	2.2
5.0	3.9	2.8	2.6	2.7
4.5	5.5	3.6	3.2	3.7
4.0	6.2	3.9	3.7	4.0
3.5	6.9	4.9	4.6	4.6
3.0	7.5	5.7	5.2	5.1
2.5	8.0	6.2	5.8	6.0
2.0	8.5	7.2	6.3	6.9
1.5	8.8	8.4	7.6	7.3
1.0	10.1	10.0	7.8	8.0