www.davidson.com.au - UE Systems Ultrasonic Detection Applications

Use the scanning module to conduct the broad scanning to pinpoint the air leaks. The scanning module with rubber focusing probe is used to determine the air losses. The tip of the rubber focusing probe on the Ultraprobe 9000 should be fifteen inches away from the leak location for determination of the leak rate.

Notice: The values presented in this table are not stated as factual CFM measurement. This table is provided solely for convenience and should only be used as a general guideline.

Factors such as turbulence, leak orifice configuration, pressure, moisture and instrument sensitivity can significantly effect your results.

View Information on UP9000

Digital Reading	100 PSIG	75 PSIG	50 PSIG	25 PSIG	10 PSIG
10 dB	.50	.30	.15	.10	.05
20 dB	0.8	0.9	0.5	0.3	.15
30 dB	1.4	1.1	0.8	0.5	0.4
40 dB	1.7	1.4	1.1	0.8	0.5
50 dB	2.0	2.8	2.2	2.0	1.9
60 dB	3.6	3.0	2.8	2.6	2.3
70 dB	5.2	4.9	3.9	3.4	3.0
80 dB	7.7	6.8	5.6	5.1	3.6
90 dB	8.4	7.7	7.1	6.8	5.3
100 dB	10.6	10.0	9.6	7.3	6.0