Industrial Technologies

division of BIOLAB 

LDS Vibration Test Systems

Permanent Magnet Shakers

  

PDF Datasheet | Request Info 

  • LDS's permanent magnet shakers are designed for modal and structural analysis, accelerometer calibration, separation and compacting of powders, and small component testing. These shakers are typically used in educational, research and laboratory environments.

  • Highly energy and cost-efficient, the permanent magnet construction provides the static field, thereby simplifying amplifier requirements. Low mass armatures and LDS's unique suspension system guarantee reliable performance over a wide frequency band.

  • Permanent magnet shakers used in conjunction with LDS PA amplifier series, Dactron LASER or COMET shaker controller.

  • A wide range of standard and customised jigs and fixtures extends their capabilities.

  • Base mounting is standard. Support trunnions are optional on all but the smallest V101/2 model. 

  • Armature diameter of the V406/8 is 38mm, increasing to 63.5mm on the V450/1 and V455/6.

  • The smaller V101/2 and V201/3 use a central spigot.

  • Useful frequency range on all models except the V101/2 can be forced air-cooled and give the following maximum sine force ratings:

  • V4201/3 26.7 N (6 lbf)

  • V406/8 196 N (44 lbf)

  • V450/1 311 N (70 lbf)

  • V455/6 489 N (110 lbf)